Author Topic: Recommendation for Alloy wheel repair  (Read 504 times)


  • Vector
  • **
  • Posts: 132
  • Number of thanks: 2
    • View Profile
Recommendation for Alloy wheel repair
« on: 28 July 2021, 10:52:08 PM »
Got 2 19" Turbines restored last week.  Lots of corrosion and kerb marks (not all down to me).

Tried the Wheel Specialist in Kingston first - agreed price and date.  When I tried to deliver my wheels and new tyres the place had closed down, I only received a reminder the day before...

So, following Ian Allan (Virginia Water)'s advice I used Premier Wheels in Redhill, Reigate, Surrey.

The job took 3 days and was 104 per wheel (and tyre fitted and balanced) - they look as good as new now.  Just need to refit onto car then I will share images.  Should add that smaller diameter wheels will probably be slightly cheaper.

Steve McF

  • Test pilot
  • ****
  • Posts: 1334
  • Number of thanks: 9
  • 9-5 was, and now 9-3ss 2.0T Aero :)
  • Location: Midlands
    • View Profile
Re: Recommendation for Alloy wheel repair
« Reply #1 on: 16 October 2021, 09:05:53 AM »
I'm interested to find out the results. I have a set of 18" Speedline alloys that were on the car when I got it, but which are all scuffed with some corrosion.

If I can get a set of standard Saab 17" Aero alloys to fit so I can take these off, I can look at getting them refurbed at some point too.