« previous next »
Pages: [1]

Author Topic: Torx Bits  (Read 2543 times)

drew baby

  • Saabisti
  • *
  • Posts: 5
  • Number of thanks: 0
    • View Profile
Torx Bits
« on: 02 January 2012, 01:32:06 PM »
Hi All,
Can anyone advise what size Torx Bit i need to remove the flywheel from a 1.9 DTH engine pls?
Logged

sgould

  • Aerobic
  • SST paid up supporter
  • Overboost
  • *
  • Posts: 5443
  • Number of thanks: 345
  • 2006 9-5 Aero estate - Hirsched.
    • View Profile
    • Christine Bennett - soprano
Re: Torx Bits
« Reply #1 on: 02 January 2012, 02:10:28 PM »
I don't know the Torx size.  But the WIS says that you need to use new bolts when refitting.  You could get the new bolts and check the Torx driver against one of them. Halfords have a good selection in their professional range.
Logged
Help support SaabTechTalk by making a Lump Sum donation or by opening a subscription. 
Options available are in your Profile/Actions.

drew baby

  • Saabisti
  • *
  • Posts: 5
  • Number of thanks: 0
    • View Profile
Re: Torx Bits
« Reply #2 on: 04 January 2012, 06:28:16 PM »
Thanks Sgould, i never thought of that, will source the bolts and grab a bit to suit.Ta again.
Logged
Pages: [1]
« previous next »