« previous next »
Pages: [1]

Author Topic: Lumber support broken?  (Read 1616 times)

Steve McF

  • Viggen
  • ****
  • Posts: 1646
  • Number of thanks: 10
  • 9-5 2.0LPT.....as was, and now 9-3ss 2.0T Aero :)
    • View Profile
Lumber support broken?
« on: 31 July 2018, 07:49:29 PM »
This may have been discussed on here before, but my driver's seat has lumber support - only when you turn the wheel from end to end, nothing happens in the seat. Is it a case that a linkage, belt or rod has come off the mechanism? If so, how on earth can one fix that, and is it straightforward? Seat is a manual, non electric, non heated seat :)

« Last Edit: 31 July 2018, 08:45:22 PM by Steve McF »
Logged

wrighar

  • SaabTechTalk Team
  • High Output Turbo
  • **
  • Posts: 436
  • Number of thanks: 15
    • View Profile
Re: Lumber support broken?
« Reply #1 on: 31 July 2018, 08:17:32 PM »
One of the 2 cables has probably snapped.
Logged

Steve McF

  • Viggen
  • ****
  • Posts: 1646
  • Number of thanks: 10
  • 9-5 2.0LPT.....as was, and now 9-3ss 2.0T Aero :)
    • View Profile
Re: Lumber support broken?
« Reply #2 on: 31 July 2018, 08:46:01 PM »
How do you access these to fix?
Logged

wrighar

  • SaabTechTalk Team
  • High Output Turbo
  • **
  • Posts: 436
  • Number of thanks: 15
    • View Profile
Re: Lumber support broken?
« Reply #3 on: 02 August 2018, 06:39:39 PM »
back lower centre rear panel of seat comes off.

side bolsters are just clipped into it by a channel plastic, which you can part by starting at the bottom and splitting open
also a small cable tie centre bottom to snip

then drops and can be removed.

you can then see cables and mech.
Logged
Pages: [1]
« previous next »