Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Messages - sean71

Pages: [1]
1
I didn't go as far into the detail of the codes to be honest but you're right when you say that the numbers swing the other way when the revs are taken up a little higher. I'll check the codes out tomorrow after work but by the sounds of it I don't have much to worry about, many thanks for your help

2
Sorry I should have listed years, engine size etc!

2004
1.9 tid
150
Not so much running poorly but more a little misfire around 1500-2000 rpm, injector 3 wiring kit done, egr blanked (with holes in the plate) manifold deflapped and cleaned....fuel economy good at around 49ish mpg.......maybe it's all in my head lol

3
Hi all I had my 9 3 on op com today and the injector readings were as follows

cly 1 1.77 mg/stroke

cly 2 -0.51 mg/stroke

cly 3 -1.23 mg/stroke

cly 4 -0.13 mg/stroke

1 and 3 banjaxed? Just some advice before I start throwing money at injectors Thanks in advance!

Pages: [1]