« previous next »
Pages: [1]

Author Topic: Dreaded ABS light  (Read 6294 times)

paddysaab

  • Airflow
  • *
  • Posts: 46
  • Number of thanks: 2
    • View Profile
Dreaded ABS light
« on: 25 October 2011, 02:14:35 PM »
Intermittent Abs light on the Griffin rapidly becoming permanent.
I jammed the brakes on while the light was on one day and the drivers front wheel locked. Would this suggest that the sensor on that wheel is dodgy?
Will it be the same sensor in the old 1993 2.0?

Thanks
Logged

sgould

  • Aerobic
  • SST paid up supporter
  • Overboost
  • *
  • Posts: 5939
  • Number of thanks: 346
  • 2006 9-5 Aero estate - Hirsched.
    • View Profile
    • Christine Bennett - soprano
Re: Dreaded ABS light
« Reply #1 on: 26 October 2011, 11:29:49 AM »
Are you getting the ABS activating when it shouldn't? Or is it just the light?

Could be just a dirty sensor or a corroded connector.  I hear that the connectors are vulnerable on he 9000.
Logged
Help support SaabTechTalk by making a Lump Sum donation or by opening a subscription. 
Options available are in your Profile/Actions.

paddysaab

  • Airflow
  • *
  • Posts: 46
  • Number of thanks: 2
    • View Profile
Re: Dreaded ABS light
« Reply #2 on: 26 October 2011, 01:00:00 PM »
Sometimes just the light and other, more seldom times, ABS activates.
Logged

sgould

  • Aerobic
  • SST paid up supporter
  • Overboost
  • *
  • Posts: 5939
  • Number of thanks: 346
  • 2006 9-5 Aero estate - Hirsched.
    • View Profile
    • Christine Bennett - soprano
Re: Dreaded ABS light
« Reply #3 on: 26 October 2011, 02:32:00 PM »
Some of these cars suffer from a cracked sensor ring.  This is a toothed ring, part of the CV joint behind the front hub.  If it cracks, the system may sense an extra tooth and misread the relative wheel speeds.

Here's one from a BL car.

Logged
Help support SaabTechTalk by making a Lump Sum donation or by opening a subscription. 
Options available are in your Profile/Actions.

paddysaab

  • Airflow
  • *
  • Posts: 46
  • Number of thanks: 2
    • View Profile
Re: Dreaded ABS light
« Reply #4 on: 06 November 2011, 05:38:06 PM »
I see that they went and changed the ABS sensors without telling me ::)
Can a round plug be cut off and a square one soldered on?
Logged
Pages: [1]
« previous next »