« previous next »
Pages: [1]

Author Topic: 9-5 rear ball joints  (Read 8465 times)

dave225

  • Airflow
  • *
  • Posts: 41
  • Number of thanks: 0
    • View Profile
9-5 rear ball joints
« on: 17 August 2014, 06:11:18 PM »
Can anyone tell me the outer diameter of the ball/spherical joints that press into the trailing arm? I might be changing them and want to make up a set of puller tools.
Cheers - Dave 
Logged

phoenix

  • SaabTechTalk-Team
  • Test pilot
  • *
  • Posts: 1165
  • Number of thanks: 108
    • View Profile
Re: 9-5 rear ball joints
« Reply #1 on: 18 August 2014, 11:01:09 AM »
Is it the two upper ones that affix to the chassis or the 4 lower ones?

I can give you dims for the tool for the 4 lower ones.
Logged

dave225

  • Airflow
  • *
  • Posts: 41
  • Number of thanks: 0
    • View Profile
Re: 9-5 rear ball joints
« Reply #2 on: 19 August 2014, 10:02:26 PM »
Its the 2 outer ones - on the hub/trailing arm - the rose joints, not the rubber bushes (subframe end).

Logged

phoenix

  • SaabTechTalk-Team
  • Test pilot
  • *
  • Posts: 1165
  • Number of thanks: 108
    • View Profile
Re: 9-5 rear ball joints
« Reply #3 on: 20 August 2014, 09:27:43 AM »
I'll try to dig it out tonight and measure it  :)
Logged

phoenix

  • SaabTechTalk-Team
  • Test pilot
  • *
  • Posts: 1165
  • Number of thanks: 108
    • View Profile
Re: 9-5 rear ball joints
« Reply #4 on: 21 August 2014, 09:17:24 PM »
Pic of tool and dimensioned drawing:

Logged

phoenix

  • SaabTechTalk-Team
  • Test pilot
  • *
  • Posts: 1165
  • Number of thanks: 108
    • View Profile
Re: 9-5 rear ball joints
« Reply #5 on: 22 August 2014, 08:57:25 AM »
Forgot to say, thread is M12 fine, although I'm not sure whether it's 1.25 or 1mm pitch.
Logged

dave225

  • Airflow
  • *
  • Posts: 41
  • Number of thanks: 0
    • View Profile
Re: 9-5 rear ball joints
« Reply #6 on: 23 August 2014, 11:21:45 AM »
Many thanks - and a proper drawing too!
Logged
Pages: [1]
« previous next »