Replaced the broken plastic studs for the bumper.

[sgould]

the two plastic fasteners along the top of the bumper on the 2007 9-5 have fallen apart.  Two small bits of plastic that I couldn't reliably find on eBay, etc.  I bought some years ago and they were the wrong size...

So today, I realised I had the perfect solution in the shed!  Some small well nuts.  They are rubber with an internal brass thread and they expand as the screw goes in.  They work!

[TomPaine]

So today, I realised I had the perfect solution in the shed!  Some small well nuts.  They are rubber with an internal brass thread and they expand as the screw goes in.  They work!

So glorious when that happens. Especially when you're always told "why on earth do you keep all that junk, it's no use to anyone ..."

[phoenix]

I used stainless rivnuts and M6 screws for mine

[carrera]

I have those for the underside splitter & 9000 bodykit

They are available new from Bill, though I do have a few on the shelf from cars I have broken. They are different to the interior fixings, with a more dimpled pattern.