Saab Tech Talk (STT)

Workshop for current Saab models => Saab 9-3 Sport Saloon / Convertible / Combi (Wagon/Estate) / Turbo X / AWD (2003 on) => Topic started by: Max Headroom on 18 June 2012, 01:27:49 PM

Title: Replacing convertible rear window seal
Post by: Max Headroom on 18 June 2012, 01:27:49 PM
2006 Convertible.

Has anyone here replaced the rear side window, front-edge seal (the one where the rear side window butts up to the rear of the front passenger window)

I have noticed mine has a split in the bottom edge of it, and while it isn't leaking yet (so far as I can tell), it isn't going to get any better.

The seal seems to be part of a harder plastic part that seems to be bonded onto the glass in some way. Is this difficult to remove?
Title: Re: Replacing convertible rear window seal
Post by: sgould on 18 June 2012, 10:54:20 PM
I thought it only came as part of the glass.  I can check later.
Title: Re: Replacing convertible rear window seal
Post by: Max Headroom on 19 June 2012, 08:58:02 AM
Hmmm - it might do. That makes it a tad worrying - & expensive! I shall have to see what my options are for a repair then  :-\
Title: Re: Replacing convertible rear window seal
Post by: Max Headroom on 19 June 2012, 12:48:36 PM
Spoke with Oxford Saab about this today - they reckoned the seal is bonded on to the glass (dumb idea) so does anyone have any links to seal repair kits? I've looked on internet briefly, haven't come up with anything   :(
Title: Re: Replacing convertible rear window seal
Post by: sgould on 19 June 2012, 03:12:07 PM
Article : Side window
PartNo : 12833881
Usage : LH, NLS-USE 12760034
Order Quantity : 1

Euro Saab Parts Direct list 12833881 at £326.17 + VAT

...... and 12760034 at £336.28 + VAT

Title: Re: Replacing convertible rear window seal
Post by: Audax on 19 June 2012, 03:50:27 PM
There is a couple on car parts connexion (so brand new) for around £200-£250.
Title: Re: Replacing convertible rear window seal
Post by: Max Headroom on 19 June 2012, 05:13:55 PM
Okey dokey - thanks for tracking those down. I will take a look. But I think I will be carrying out some kind of a repair on it to be honest  :(
Title: Re: Replacing convertible rear window seal
Post by: rako2002 on 09 November 2012, 12:22:49 PM
Hi - i have the same problem with my 9-3 convertible, just wondering if you managed to successfully repair it or maybe there is no point in doing this and this needs to be replaced.

cheers,
rako2002
Title: Re: Replacing convertible rear window seal
Post by: Max Headroom on 13 November 2012, 12:17:01 AM
Hi Rako - no not done anything with it yet - but...

I bought a bicycle puncture repair kit the other day in order to use the glue from it

Im still pondering how to go about actually making the repair though. it needs to retain the sponginess of that area of the seal